What is the difference between a Step Feeder, Bowl Feeder and Disc Feeder?

The Step Feeder lifts screws with moving steps and no vibration source — M2 to M24 screws depending on capacity (0.8L to 4L), for automotive use. The Bowl Feeder uses a vibratory bowl for M2-M6 screws at up to 40 pieces per minute. The Disc Feeder feeds M0.5-M2 micro screws via a disc, with a 0% jamming rate. Selection depends on fastener type, speed and available space.

What fastener sizes can Danikor screw feeders handle?

Danikor feeders handle fasteners from M0.5 micro screws on the Disc Feeder up to M24 on the highest-capacity Step Feeder. The right model depends on the fastener diameter, length and head geometry.

How does a screw feeder integrate with an electric screwdriver or tightening module?

The feeder connects to the screwdriver via flexible tube (Blow Screw system) or directly to a Danikor Universal Series tightening module. Control communication uses digital I/O signals, and Danikor feeders also support RS485 communication with tightening modules.

Automatic Screw Feeders — Sumake, Danikor

Less Time per Cycle, More Productivity

On high-volume assembly lines, the time an operator spends picking a screw from a tray and positioning it on the tool tip can represent 30–50% of the total station cycle time. An automatic screw feeder eliminates that motion entirely, delivering the fastener directly to the tool ready to tighten. TMG distributes Sumake and Danikor screw feeder systems in Mexico for automotive, electronics and industrial assembly.

Feeder Types Available

Step Feeder: stepped feeding for M2–M24 screws — standard, combination and self-tapping — automotive application
Vibratory Bowl Feeder: automatic orientation of M2–M6 bulk screws for automotive electronics and appliances
Disc Feeder: precision disc feeding for micro screws M0.5–M2 in 3C electronics and IC assembly — 0% jamming rate
Vibrating Hopper: high-capacity continuous supply (5L–20L) for uninterrupted screw delivery to other feeders
Drum Feeder: screw presentation and counting for M1.6–M6 fasteners at manual stations with a hand screwdriver

-35%typical cycle time reduction

M0.5minimum screw size

M24maximum screw size

0.02%jamming rate

Brands

Sumake · Danikor

Feeder Types

Step · Bowl · Disc · Drum · Vibrating Hopper

Fasteners

M0.5 – M24 by model

Compatible With

Electric and pneumatic screwdrivers

Distribution

Saltillo · Monterrey · Mexico

Automation Cycle time M0.5–M24 Assembly

Danikor Series

Screw Feeder Models

Select the right feeder type based on screw size, production volume and station type — automatic or manual.

Step Feeder

FDH-SST Series — Step Feeder

Step-feeding system for standard, combination and self-tapping screws M2–M24. Jamming rate of 50 PPM (0.005%) on 0.8L, 2L and 4L and 0.02% on 1.25L. Long/short screw detection with ±1 mm accuracy. Application: automotive.

Screws M2–M24 · standard, combination, self-tapping (0.8L M2–M6 · 1.25L M3–M8 · 2L M3–M10 · 4L M4–M14 in standard configuration)
Jamming: 50 PPM on 0.8L/2L/4L (200 PPM with spring washer) · 0.02% on 1.25L (<0.05% with washer)
No vibration source — no debris and easier cleaning
Long/short screw detection: ±1 mm accuracy
Single (C1) or dual channel (C2) · capacity 0.8L – 4L
Noise 75 dB (80 dB on 4L) · air pressure 0.6 MPa · DC 24V (220V 50Hz supply)
Compatible with Danikor universal and electric tightening modules

FDH-SST M2–M24 50 PPM jamming

Models: FDH-SST-0.8L · FDH-SST-1.25L · FDH-SST-2L · FDH-SST-4L

Bowl Feeder

FDH-SVB Series — Vibratory Bowl Feeder

Vibratory bowl feeder for screws M2–M6. Integrally molded polymer tray for low friction and noise below 72 dB. Designed for automotive electronics, home appliances, instrumentation and 3C electronics.

Screws M2–M6 · standard and combination
Jamming rate: 0.02% (2/10,000) · spring flat washer: <0.05%
Feeding speed up to 40 pcs/min
Noise <72 dB (integrated wear-resistant polymer tray) · standard material shortage sensor
Capacity 1.25L · single (C1) or dual channel (C2)
Pressure 0.6 MPa · DC 24V / 220V 50Hz
Applications: automotive electronics, home appliances, instrumentation, 3C electronics

FDH-SVB M2–M6 40 PCS/MIN

Models: FDH-SVB-1.25L-C1 · FDH-SVB-1.25L-C2

Vibrating Hopper

HPS-LVF Series — Vibrating Hopper

High-capacity vibrating hopper for continuous, uninterrupted screw supply on high-volume lines. Capacities of 5L, 10L and 20L. Independent straight-vibration system for stable feeding. Compatible with Danikor Step Feeders and Bowl Feeders.

Capacity: 5L · 10L · 20L
In-house straight vibration system — stable feeding
24V/36V electronic control — low energy consumption
5L and 10L: for Bowl Feeder 1.25L and Step Feeder 0.8L/1.25L/2L · 20L: for Step Feeder 4L
Rated power: DC 24V 120W (5L) · DC 36V 180W (10L and 20L) · 220V 50Hz customer supply
Optional: screw shortage detection, barcode scan to open lid, adaptive function

HPS-LVF 5L – 20L Continuous

Models: HPS-LVF-5L · HPS-LVF-10L · HPS-LVF-20L

Disc Feeder

FDH-SDC Series — Disc Feeder

Disc feeder for micro screws M0.5–M2. Patented non-stuck technology with 0% jamming rate. Repeat positioning accuracy ±0.05 mm (140 mL). Application: 3C electronics, IC assembly, precision micro-assembly.

Micro screws M0.5–M2 · standard and super screw
Jamming rate: 0% (patented non-stuck technology)
Repeat positioning accuracy: ±0.05 mm (140 mL)
Screw length detection accuracy: ±0.2 mm (optional, 70/120 mL)
Capacity: 70ML · 120ML · 140ML
Pressure 0.5–0.6 MPa · DC 24V · Rated power 24W
Optional vacuum module and FlexPendant · AI-based abnormal posture detection (140 mL)

FDH-SDC M0.5–M2 0% Jamming

Models: FDH-SDC-70ML · FDH-SDC-120ML · FDH-SDC-140ML

Danikor FDH-SDT-H1 Drum Feeder — hand pick-up with the screw presented at the machine head

Drum Feeder H1

FDH-SDT-H1 Series — Drum Feeder, Hand Pick-up

Drum feeder that presents the screw at the machine head so the operator picks it up directly with a magnetic bit. Single-screw pick-up; requires magnetizable fastener. Application: manual stations with smart screwdrivers.

Screws M1.6–M5 (450 mL) · M3–M6 (900 mL) · standard and combination
Single pick-up at the head · requires magnetizable screw
Jamming rate: 0.03–0.05% standard · 0.05–0.08% with washer
Feeding speed up to 50 pcs/min
Capacity 450 mL (7 kg) · 900 mL (9.4 kg) · DC 24V · 36W
No compressed air required on the standard model
For use with a smart screwdriver and magnetic bit

FDH-SDT-H1 M1.6–M6 50 PCS/MIN

Models: FDH-SDT-450mL-H1 · FDH-SDT-900mL-H1

Danikor FDH-SDT-CT Drum Feeder — counting type that delivers the exact programmed number of screws

Drum Feeder CT

FDH-SDT-CT Series — Counting Drum Feeder

Counting variant: delivers the exact number of screws programmed for each part. By controlling how many are served, the manual station prevents a missing screw without relying on operator attention. Application: auto parts, automotive assembly, EV battery packs and appliances.

Feeding by programmed quantity · prevents missing screws
Screws M1.6–M5 (450 mL) · M2–M6 (900 mL)
Screw length ≤20 mm (450 mL) · ≤25 mm (900 mL)
Pick the screw with the bit or place it straight into the hole
Speed up to 50 pcs/min · DC 24V · 36W
Options: shortage and overflow detection in the hopper
Options: screw cleaning, length detection, code-based opening

FDH-SDT-CT 450–900 mL Counting

Models: FDH-SDT-450mL-CT · FDH-SDT-900mL-CT

Automatic Screw Feeders