What is the difference between a transducerized and a current-controlled electric screwdriver?

A transducerized screwdriver measures actual applied torque with an internal sensor (6σ ±5% accuracy), generating digital evidence per cycle with an OK/NG result. A current-controlled model estimates torque from motor current, with 6σ ±7.5% accuracy — more affordable. For critical joints in automotive assembly, the Danikor transducer model is recommended.

Are Danikor electric screwdrivers compatible with PLC and MES systems?

Yes. Through their controllers, Danikor screwdrivers communicate via Open Protocol, Modbus TCP and I/O, with optional Profinet, EtherCAT or EtherNet/IP bus through an external card, and upload every result to MES in real time. OK/NG results can be linked to a barcode by station, workpiece, Job or Pset.

Where to buy Danikor electric screwdrivers in Mexico?

TMG is the official Danikor and Sumake distributor in Mexico, operating from Saltillo with nationwide coverage. We offer sales, calibration, repair and operator training for the full range of controlled-torque electric screwdrivers.

Controlled Torque Electric Screwdrivers — Danikor, Sumake

Current

Handheld Current Screwdriver

Current-sensing handheld screwdriver with AI self-learning and brushless motor. 16 Psets, direct MES connectivity and OK/NG ring light — EV, electronics, home appliances and medical equipment.

Range: 0.05–11 Nm · accuracy 6σ ±7.5% (ISO 5393)
16 Psets · up to 15 steps · Job superposition protection
AI self-learning: tightening strategy parameters recommended automatically
RS485 · TCP-IP · digital I/O · real-time MES upload
OLED display · 3-color ring light · buzzer · front light
Handheld or fixed-mount · activation: push, trigger or remote
Threaded expansion port for vacuum nozzle or fixed-mount bracket
Controller: OPT-STC-DC2-V2-500W · 24V DC

PTC-DSH G2 6σ ±7.5% · 24V DC

Models: PTC-DSH-1800M · PTC-DSH-5000M · PTC-DSH-0020N · PTC-DSH-0040N · PTC-DSH-0070N · PTC-DSH-0110N

System

Compact Handheld System

Danikor intelligent screwdriver integrated with a compact 24V DC adaptor controller mounted directly at the workstation — no external control cabinet needed. Optional Dk 10.1" teaching pendant for advanced programming on the production floor.

24V DC adaptor controller mounted directly at the workstation
No external cabinet — plug & play solution ready for production
3.5" touch screen on controller · reset button for system alarms
JTAG · USB · SD · TCP-IP · RS485 · I/O in one compact module
Compatible with PTT-DSH (transducer 6σ ±5%) and PTC-DSH (current 6σ ±7.5%)
Optional Dk 10.1" pendant for advanced programming and real-time curve analysis
Cycle-by-cycle defect detection · direct MES upload
Models: OPT-STC-DC1-V3-500W · OPT-STC-DC2-V2-500W

OPT-STC-DC 24V DC · Plug & Play

Compatible with: PTT-DSH series (transducer 0.14–20 Nm) · PTC-DSH series (current 0.05–11 Nm)

Corded · Transducer · Straight

TTC Series Straight

Straight corded transducer screwdrivers for demanding automotive assembly: body-in-white, powertrain and tires. Eleven models from 4 to 480 Nm with 6σ ±5% accuracy.

Range: 4–480 Nm · 6σ ±5% accuracy
Max speed: 150–1,740 rpm depending on model
Drive: S 3/8" (20 Nm) · S 1/2" (35–140 Nm) · S 3/4" (200–480 Nm)
Weight: 2.3–6 kg depending on model
Design life: >10 million cycles · MTTF: >1 million
CK controller: OPT-CCK-010-TC1-B1-1000W (up to 200 Nm) · OPT-CCK-010-TC1-B2-1300W (90–480 Nm)
Advanced strategies: clamping torque · torque-angle · dwell time · zero-speed hold
OP Protocol · Modbus TCP · I/O · Profinet / EtherCAT / EtherNet IP bus (optional card)
Cable: 5 / 10 / 15 / 20 m · straight or angle connector

PTT-CSH 4–480 Nm S 3/8" · S 1/2" · S 3/4"

Models: PTT-CSH-0200N (4–20 Nm · 1,740 rpm) · PTT-CSH-0350N (7–35 Nm · 1,150 rpm) · PTT-CSH-0500N (10–50 Nm · 660 rpm) · PTT-CSH-0800N (16–80 Nm · 440 rpm) · PTT-CSH-1300N (26–130 Nm · 240 rpm) · PTT-CSH-2000N (40–200 Nm · 170 rpm) · PTT-CSH-0900N (18–90 Nm · 870 rpm) · PTT-CSH-1400N (28–140 Nm · 470 rpm) · PTT-CSH-2100N (42–210 Nm · 350 rpm) · PTT-CSH-3150N (63–315 Nm · 230 rpm) · PTT-CSH-4800N (96–480 Nm · 150 rpm)

Corded · Transducer · Angle

TTC Series Angle

Angle corded transducer screwdrivers for hard-to-reach joints in automotive assembly. Five models from 4 to 120 Nm with 6σ ±5% accuracy.

Range: 4–120 Nm · 6σ ±5% accuracy
Max speed: 280–1,630 rpm depending on model
Drive: S 3/8" (up to 50 Nm) · S 1/2" (80–120 Nm)
Weight: 1.6–3.3 kg depending on model
Design life: >10 million cycles · MTTF: >1 million
CK controller: OPT-CCK-010-TC1-B1-1000W
Advanced strategies: clamping torque · torque-angle · dwell time · zero-speed hold
OP Protocol · Modbus TCP · I/O · Profinet / EtherCAT / EtherNet IP bus (optional card)
Cable: 5 / 10 / 15 / 20 m · straight or angle connector

PTT-CAH 4–120 Nm S 3/8" · S 1/2"

Models: PTT-CAH-0200N (4–20 Nm · 1,630 rpm) · PTT-CAH-0330N (6–33 Nm · 1,110 rpm) · PTT-CAH-0500N (10–50 Nm · 700 rpm) · PTT-CAH-0800N (16–80 Nm · 420 rpm) · PTT-CAH-1200N (24–120 Nm · 280 rpm)

TCD Handheld Current Screwdriver — Danikor

Corded · Current

TCD Series — Handheld Current

Handheld current-control screwdriver for smart digital tightening across EV, automotive electronics, auto parts, and 3C industries. Range 0.02–20 Nm, 6σ ±7.5% accuracy, floating-screw and thread-slip detection — full MES integration via CS Series controller.

Range: 0.02–20 Nm · accuracy 6σ ±7.5%
Micro-torque models: 0.02–0.9 Nm · 33 mm grip · up to 3,000 rpm
Strategies: torque · speed · angle · angle-torque · clamping torque · self-learning
50 Psets · 50 Jobs (via PC software) · 200,000 stored tightening results
Continuous detection: floating screw · thread slip · missing washer
Compatible with CS Series controller: 3.5" or 7" touchscreen
Communication: TCP/IP · Modbus TCP · I/O · real-time MES upload
HM4 (micro-torque), HEX 1/4" or S 3/8" quick-change bit connector by model · ergonomic design

PTC-DSH 0.02–20 Nm

Models: PTC-DSH-1000M → PTC-DSH-0200N

Corded · Impulse · Transducer

TCP Series — Corded Impulse Transducer

Pistol-grip corded transducer screwdriver with pulse technology for zero-reaction-force operation. Range 0.4–20 Nm, high-speed motor up to 3,000 rpm, anti-static design rated for 220 V environments. Standard mode 6σ ±5% · Pulse mode 6σ ±7.5–15%. Compatible with CM Series.

Range: 0.4–20 Nm · Standard mode: 6σ ±5% (consistent over 500,000 cycles) · Pulse mode: 6σ ±7.5–15%
High-speed motor: up to 3,000 rpm · cycle time improved up to 100%
Low reaction force: pulse operation for stable one-handed use during extended tasks
Anti-static design: safe for handheld tightening in 220 V high-voltage environments
Design life: >10 million cycles · MTTF: >1 million
Compatible with CM Series: 64 Psets · 128 Jobs · advanced clamping torque strategies
Industries: auto parts · aerospace · military · energy storage · rail transit · white goods
Bit connector: HEX 1/4" (0.4–12 Nm models) · S 3/8" (4–20 Nm model)

PTT-CPH 0.4–20 Nm

Models: PTT-CPH-0020N-38 → PTT-CPH-0200N-38

Fixed · Transducer

TTA Series — Fixed Transducer

High-precision fixed transducer screwdriver for automated production lines. Range 0.14–200 Nm, 6σ ±5% accuracy, design life over 10 million cycles. Fixed or handheld use with optional trigger. Pairs with CM Series and clamping torque strategy.

Range: 0.14–200 Nm · accuracy 6σ ±5% across full range
Design life: >10 million cycles · MTTF: >1 million
4 start modes: fixed or handheld, optional trigger, remote / I/O / bus / protocol
Compatible with CM Series: 64 Psets · 128 Jobs · 15 steps · 200,000 results (also with CS)
Strategies: torque · speed · angle · torque-angle · clamping torque · monitoring
Communication: OP · Modbus TCP · I/O · MES · external bus (Ethernet IP / Profinet / EtherCAT)
Applications: EV · automotive electronics · auto parts · 3C · automated assembly lines
Cable: 5m / 10m / 15m / 20m · straight or angle connector optional

PTT-ASF 0.14–200 Nm

Models: PTT-ASF-7000M → PTT-ASF-2000N

Fixed · Current

TCA Series — Fixed Current

Fixed current-detection intelligent screwdriver for high-volume smart assembly. Range 0.1–200 Nm, 6σ ±7.5% accuracy, advanced error-proofing and multiple tightening strategies — auto parts, 3C, and home appliances. Full MES integration via STC/HTC controller.

Range: 0.1–200 Nm · accuracy 6σ ±7.5%
Strategies: torque · speed · angle · angle-torque · multi-step control
Advanced error-proofing: floating screw · thread slip · missing washer detection
Cycle-by-cycle traceability · direct upload to MES / production system
Communication: TCP/IP · Modbus TCP · I/O to PC/PLC and MES
Controller with 3.5" or 7" screen · 130 W, 800 W or 1300 W by model
Applications: auto parts · 3C electronics · home appliances · automated assembly
Controllers: OPT-STC-C1-V3 / OPT-HTC-C1-V3 at 130, 800 and 1300 W

TCA 0.1–200 Nm

Models: PTC-ASF-5000M · PTC-ASF-0014N · PTC-ASF-0045N · PTC-ASF-0070N · PTC-ASF-0120N · PTC-ASF-0200N · PTC-ASF-0500N · PTC-ASF-0800N · PTC-ASF-1300N · PTC-ASF-2000N

Electric Screwdrivers for Controlled Torque

Intelligent Tightening with Digital Evidence

Key Features

Main Applications